Instructions:
Remove the wax cap.
Adjust the handle on the inner container for more ease of use.
When the handle is firmly attached place the hot wax inside the container. Turn the temperature switch to the "MAX" option, so that the wax melts. 30 minutes.
During the melting process the indicator light will turn on and off repeatedly for the correct temperature setting.
When the wax melts lower the temperature to 60 or 70 degrees.
The device will work automatically when the temperature is lower than the one you have selected, the indicator will be on "ON".
When the temperature becomes higher than the one you have selected, the device will stop working and the indicator will be "OFF".
This ensures that the wax will be melted but not overheated.
When finished, set the temperature knob to “OFF”.
Then remove the cap using the built-in handle.
We recommend that you apply proper cleaning to remove any residue from the device.
Do not place the device next to water or generally in wet areas.
If the device is exposed to water, unplug it immediately. When the device is unplugged, some parts of the device will be activated for a while.
Keep the cable away from heated surfaces
Make sure the device is unplugged after use.
Use the device only for its intended purpose.
Never use the device if: the cord or plug is damaged, it is not working properly, it has been exposed to water, it has been dropped or it has been damaged in any way.
